The AB-EM electromagnetic clamp complies with the national standard IEC 61000-4-6 and is a specialized product for testing the immunity of equipment to radio-frequency field-induced conducted disturbances.injecting disturbance signals into the cable assemblies in the slots so that the Equipment Under Test (EUT) is subjected to the levels specified in the national standard.

For precise measurements, the electromagnetic clamp is also equipped with an auxiliary absorption clamp and calibration pieces.

Fitur

See Tables 1 and 2 for the coupling coefficient and attenuation characteristic curves; the difference is 9.5 dB ± 1.5 dB.

Maximum input power: 100 W (5 minutes);

Injection frequency: 150 kHz to 230 MHz;

At frequencies greater than 10 MHz, the coupling/decoupling directivity is greater than 10 dB

Measurable cable diameter: <Φ18 mm

Lampiran - HCS

Instruction Manual 1 copy

Test Cable One

100W 6dB Attenuator One

Calibration Fixture (Optional) One set

Using Connection Diagrams

AB-EM

AB-EM Data Sheet

Serial No.: 21021 Differential Error: 9.5 dB ± 1.5 dB Date: April 29, 2021

Frekuensi (MHz)	Coupling Coefficient (dB)	Attenuation Coefficient (dB)	Difference (dB)
0.15	-2.7	-12.3	9.6
0.2	-2.4	-12.0	9.6
0.3	-2.2	-11.8	9.6
0.32	-2.2	-11.8	9.6
0.35	-2.2	-11.8	9.6
0.4	-2.1	-11.8	9.7
0.45	-2.1	-11.8	9.7
0.5	-2.1	-11.8	9.7
0.55	-2.1	-11.8	9.7
0.6	-2.1	-11.8	9.7
0.65	-2.1	-11.8	9.7
0.74	-2.1	-11.8	9.7
0.75	-2.1	-11.8	9.7
0.8	-2.2	-11.9	9.7
0.85	-2.3	-11.9	9.6
0.9	-2.4	-12.1	9.7
0.95	-2.5	-12.1	9.6
1	-2.5	-12.1	9.6
1.5	-2.1	-11.7	9.6
2	-2.1	-11.7	9.6
2.5	-2.1	-11.7	9.6
3	-2.1	-11.7	9.6
4	-2.2	-11.8	9.6
5	-2.2	-11.8	9.6
6	-2.3	-11.8	9.5
7	-2.4	-11.8	9.4
8	-2.4	-11.8	9.4
9	-2.5	-11.9	9.4
10	-2.6	-11.9	9.3
12	-2.8	-12.1	9.3
15	-3.2	-12.4	9.2
18	-3.5	-12.6	9.1
20	-3.6	-12.8	9.2
22	-3.6	-12.8	9.2
25	-3.5	-12.8	9.3
28	-3.1	-12.4	9.3
30	-2.6	-11.9	9.3
32	-2.2	-11.5	9.3
35	-1.3	-10.6	9.3
38	-0.5	-9.8	9.3
40	0.0	-9.3	9.3
45	1.1	-8.4	9.5
50	1.8	-7.8	9.6
60	2.5	-7.4	9.9
70	2.6	-7.1	9.7
80	2.7	-6.9	9.6
85	2.9	-6.9	9.8
90	3.0	-6.9	9.9
95	3.2	-6.9	10.1
100	3.3	-6.8	10.1
120	3.5	-6.8	10.3
140	3.4	-7.0	10.4
160	2.6	-8.0	10.6
180	1.9	-8.2	10.1
200	0.9	-9.3	10.2
210	0.6	-9.6	10.2
220	0.1	-10.1	10.2
230	-0.1	-10.3	10.2

List of AB-EM Calibration Fixtures

Nomor	Pilih Model	Nama	Quantity/piece
1	M-004	150Ω/50Ω Adapter	2
2	M-006	5 W / 50 Ω load	1
3	E-001	L-Shaped Calibration Bracket	2
4	E-003	4mm Test Rod (725mm)	1

*The 4mm test probe is inside the electromagnetic clamp packaging box;

Solusi Pengujian Luminer LED dan Penggerak Daya LED

Sistem Goniofotometer: LSG-6000, LSG-1890B, atau LSG-1700

Sistem Uji Spektroradiometer & Bola Integrasi: LPCE-2 or LPCE-3

LED Life Memelihara Sistem Pengujian Sesuai dengan LM-80: LEDLM-80PL

Waterproof Test for IPX5 and IPX6 Levels: JL-56

Mesin Uji Tahan Debu untuk Pengujian IP5X dan IP6X: SC-015

Penguji Penggerak Daya LED: LS2090 (untuk lab) dan ATE-2 (untuk lini produksi)

Alat Uji Keamanan Listrik: LS9955

Solusi Pengujian CFL dan Ballast Elektronik

Sistem Goniofotometer: LSG-1890B or LSG-1700

Sistem Pengujian Bola Integrasi dan Spektrofotometer: LPCE-2 or LPCE-3

Pemberat Referensi yang Dapat Disetel: DYJ-50HZ, HCS-109A, dan DYJ-HID

Penguji Ballast Listrik: WT5000 (untuk lab) dan ATE-1 (untuk lini produksi)

Alat Pengukur Torsi Digital dan Penguji Umur Multiarah: CH338 ke CH316

Alat Uji Keamanan Listrik: LS9923, ZRS-3H, ZY-3

Solusi Pengujian EMC dan EMI untuk Luminer CFL dan LED

Sistem Uji EMI: EMI-9KB or EMI-9KA

Simulator Pelepasan Muatan Elektrostatik: ESD61000-2

Pengukuran Kekebalan EFT: EFT61000-4

Pembangkit Lonjakan: SG61000-5

Generator Penurunan dan Gangguan Tegangan: CSS61000-11

Generator Gelombang Cincin: RWG61000-12

www. Lisungroup.com

Paten Diajukan

Seluruh hak cipta dilindungi oleh Lisun Kelompok

Dapat Berubah Sewaktu-waktu Tanpa Pemberitahuan